Fused Dove Ornament

Design, Fabrication, and Text by Mary Harris

A quick and easy 3" x 3" ornament project that can be made with or without a kiln. Using 2 mm glass gives a less heavy, finer appearance to the dove. Gluing the wings to the dove’s body after fusing the project gives the piece a three-dimensional appearance. A firing schedule is included.

This article was originally published on page 32 in the Fall 2018 issue of Glass Patterns Quarterly.
Back issue magazine, Digital Issue and CD available


300xDoveOrnament

To view (and save) the whole article with full size pattern as a PDF, download for $5.95 below...

Read 1286 times