Cavity Casting

Design, Fabrication, and Text by Dane Brady

Photography by Jason Brady

A 6" x 6" x 1" cavity casting made using a mold to create the central design. The casting is placed in the center of a box made from kiln dams, then surrounded and covered with frit and fired. The outside edges of the piece are cold worked to finish. Firing schedules are provided.


This article was originally published on page 68 in the Summer 2020 issue of Glass Patterns Quarterly®.

Back issue Print magazine and Digital Issue available.


To view (and save) the whole article as a PDF, download for $5.95 below...

Read 792 times